Snooper Truckmate S6000 Guia De Inicio Rapido página 7

4. Installing the Truckmate using the Windscreen Suction Cup bracket
You can mount your Truckmate to the inside of your vehicles windscreen using the
windscreen bracket provided.
Clean the area where you wish to position
● ●
the bracket thoroughly with a good
quality glass cleaner. This allows a more
secure seal on the windscreen.
Place the suction cup and bracket on
● ●
the windscreen and push the locking
lever towards the windscreen to secure
the bracket.
Adjust the angle of the bracket so that
● ●
when the unit is attached to it you can
view the display and operate the controls
safely.
Position Truckmate onto the bracket, by
● ●
inserting the bottom of the unit first and
finally clipping the top of the bracket into
the slot on the top of the unit. To remove
Truckmate simply unclip the unit, by
pushing the top of the bracket and taking
the unit from the holder.
Truckmate can be powered directly
● ●
either from the internal battery if it is fully
charged or powered from the cigarette lighter socket. To use the cigarette lighter
socket, plug the smaller plug on one end of the power cable into the socket marked
power and plug the larger plug into the cigarette lighter socket of your vehicle.
Please Note: Only use the cigarette lighter power cable provided with Truckmate.
Truckmate operates on 12V and using any other cigarette lighter power cable will
damage your device and void the warranty.
Locking
lever
7 • UK