Descargar Imprimir esta página

STERWINS 1100 JET INAUTO-4 Instrucciones De Montaje, Utilización Y Mantenimiento página 208

Bomba de alimentación automática

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
FR
- before checking, maintaining or working on the product
- if the machine starts to vibrate abnormally (inspect immediately).
ES
4.5 SPECIFIC FUNCTIONS
Pressure control
PT
The pressure control system switch on the pump automatically when water is needed. When the water
supply has been interrupted, the pump will switch off again.
IT
EL
RESET
PL
RU
Integrated filter
The pump is equipped with an integrated filtering system (380µ). It is important to check regularly that
the filter is not dirty or clogged (refer to chapter "cleaning"). Note that this pump is not designed to be
KZ
used with dirty water.
5. TRANSPORTATION
UA
5.1 TRANSPORT THE MACHINE
RO
EN
Always lift and carry the pump with the carrying handle. Protect the product from any heavy impact
or strong vibrations which may occur during transportation in vehicles. If you want to transport the
appliance on a vehicle secure it from slipping or vibrating. Secure the product to prevent it from slipping
or falling over.
6. WINTERING
Illustration 6.1 to 6.3
Switch off and empty the pump.
Follow all instructions given on chapter storage below.
7. STORAGE
7.1 STORE THE MACHINE
The instructions mentioned in the maintenance section must be carried out before any storage.
Illustration 6.1 to 6.3
• Completely drain the pump, allow it to dry and put back the two connector caps.
• Clean the product, filters and accessories
• Store the unit and its accessories in a frost-free place.
illustration 4.i
• Power : If lit, the pressure control system has been powered and is ready for
operation.
• Run: If lit, the pump is operating. A line of the discharged liquid is opened.
POWER
• Failure : If lit, the pressure control system has detected a fault. In that case,
RUN
please refer to "Troubleshooting" chapter.
FAILURE
• Reset : To restart the pump after resolving a failure, reset the pressure control
unit by pressing this button.
CAUTION In order to prevent accidents or injuries,
keep in mind the weight of the appliance during transport
(see Technical Data).
208
13
F
E
P
P
R
K
U
R
E

Publicidad

loading