Publicidad
Idiomas disponibles
Idiomas disponibles
Using Vehicle Lap Belt
1
- Route vehicle lap belt through
belt path and buckle vehicle lap belt. (1)
Remove all slack from vehicle lap belt. (2)
Lock vehicle belt (refer to vehicle owner's
manual).
2
- Close True Tension door and replace seat cover
and infant insert (if used).
To open True Tension door, unbuckle vehicle belt
and push down slightly on door to release tension.
WARNING: Check that child restraint is
securely installed before each use.
Check Installation
Seat is in appropriate rear facing recline
position.
Seat is securely installed. Hold seat near rear-
facing belt path and move seat side to side, front
to back, and up and down. Seat should move
less than 1 inch.
Tether strap is not used for rear facing
installation and must be secured in storage
location on back of child restraint.
Cup holders may be placed in any position after
installation.
48 RAVA instructions
BLUE
rear facing
1
2
1
2
RAVA instructions
49
Publicidad
