Publicidad
Idiomas disponibles
Idiomas disponibles
Using Vehicle Lap/Shoulder Belt
(preferred installation method)
1
- Route vehicle lap/shoulder belt through
forward facing belt path and buckle vehicle
lap/shoulder belt.
2
- Remove all slack from the vehicle belt system
to properly secure this child restraint. (1) Lock
vehicle belt (refer to vehicle owner's manual).
Close True Tension door and replace seat cover.
Test by pulling on shoulder belt to ensure it is
locked.
3
- Attach tether hook to tether anchor on vehicle
and tighten (p.36).
4
- Tuck excess webbing behind child restraint.
To open True Tension door, unbuckle vehicle belt
and push down slightly on door to release tension.
WARNING: Check that child restraint is
securely installed before each use.
Check Installation
Seat is in appropriate forward facing recline
position.
Seat is securely installed. Hold seat near
forward facing belt path and move seat side
to side, front to back, and up and down. Seat
should move less than 1 inch.
Tether is properly used and attached to vehicle
tether anchor.
52 RAVA instructions
1
RED
2
2
1
3
4
RAVA instructions
53
Publicidad
