Casadio Enea Uso E Instalacion página 28

Note. These operations must be performed with the
appliance off.
Automatic Grinder-Doser
The machine may be adjusted for different grindings (from
ne to course) via a screw (4) as shown on the graded
indicator (18).
On Demand Grinder-Doser
Automatic dose adjustment system.
With each adjustment of the grinders, the grinding
time for the coffee doses is automatically adjusted
according to the selected granulometry.
In the On Demand version, adjust the screw (4) on the
grinder for different types of coffee grounds ( ne or coarse).
Variations are shown on the display screen as follows:
Fine grounds › short granulometry bar, low reference
•
value;
Coarse grounds › long granulometry bar, high reference
•
value.
If the coffee is dispensed too slowly, the grind of the coffee
beans is too ne. Turn the ring nut (4) anticlockwise to
obtain a coarser grind (the numbers on the indicator
increase: 2 - 3 - 4 - ...).
If the coffee is dispensed too quickly, the grind of the coffee
beans is too coarse. Turn the ring nut (4) clockwise to
obtain a ner grind (the numbers on the ring nut decrease:
4 - 3 - 2 - ...).
When the "Dose Adjustment" function is NOT
enabled.
Activation and con guration of the function is
carried out by technical staff.
The grinding time of the coffee doses remains
unchanged with each grinder adjustment.
10. Regulating the grind
18
ON DEMAND VERSION
Granulometry
bar
Granulometry
bar
8 EN
COARSE
4
Fine grounds
Reference
Grinding time
Course grounds
Reference
Grinding time
FINELY
value
value