iRobot RVE-Y1 Guia Del Propietario página 10

Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to
remove it from the robot.
EN
2
Pull firmly on the wheel to remove it from
its housing (see illustration below).
3
Remove any debris from inside the wheel
cavity.
4
Reinstall all parts when finished.
Make sure that the wheel clicks back
into place.
Housing
Important: A front wheel clogged with
hair and debris could result in damage to
your floor. If the wheel is not spinning freely
after you have cleaned it, please contact
Customer Care.
6 For more information, visit global.irobot.com
Washing the Bin
Important:
Remove the filter before washing the bin.
1
Release the bin, remove the filter and
open the bin door.
2
Rinse the bin using warm water.
Axle Wheel
Note: Bin is not dishwasher safe.
3
Make sure that the bin is completely dry.
Reinsert the filter and place the bin back
in the robot.
Do not wash the filter.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.