Descargar Imprimir esta página

iRobot RVE-Y1 Guia Del Propietario página 7

Ocultar thumbs Ver también para RVE-Y1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
Cleaning
• Your robot will automatically explore and clean your home in
neat rows, avoiding obstacles using its front-facing camera.
It will return to the charging station at the end of a cleaning
job and whenever it needs to recharge.
Your robot is able to recognise and avoid
objects. However, it is still recommended to
remove excess clutter before cleaning.
• To end a job and send the robot back to its charging station,
hold the clean button down for between 2-5 seconds. A blue
light ring pattern will indicate that the robot is seeking the
charging station.
• When your robot detects an especially dirty area, it will
engage Dirt Detect™ mode, moving in a forwards/backwards
motion to clean the area more thoroughly. The light ring
indicator will flash blue.
When the robot senses its bin needs to be
emptied, the light ring indicator will illuminate in
a red sweeping motion toward the rear.
Just press the clean button
Tap to Start / Pause / Resume
Hold for 2-5 seconds to end a job
Troubleshooting
• Your robot will tell you something is wrong by playing an audio alert and turning
the light ring indicator red. Press the clean button or tap the bumper for details.
Check the iRobot Home App for further support.
Red Light Ring
Low battery. Please charge.
• After 90 minutes of inactivity off the charging station, the robot will
automatically end its cleaning job.
• To factory reset your robot, remove the dust bin and hold down the clean button
for seven (7) seconds. A sound will let you know when the factory reset has been
completed. Press down the clean button once more to confirm.
Battery safety & postage
For best results, only use the Lithium Ion Battery that comes
with your robot.
WARNING
: Lithium ion batteries and products that contain lithium ion batteries are
subject to stringent transportation regulations. If you need to post this product for
service, travel or any other reason, you MUST follow the postage instructions below.
• Battery MUST be turned off before postage.
• Turn off the battery by removing the robot from the charging station and holding
down the clean button for 3 seconds with one wheel off the ground. All indicators will
turn off.
• Package the robot securely for postage.
• If you need further assistance, contact our Customer Care team or visit
global.irobot.com.
3
Roomba
j7 Owner's Guide
®
EN

Publicidad

loading

Este manual también es adecuado para:

Adi-n1Roomba j7Rve-y1 adi-n1