BABYTREND TS06 C Serie Manual De Instrucciones página 10

Idiomas disponibles

INFANT CAR SEAT

THE INFANT CAR SEAT

WARNING:

ALWAYS use the safety belt to secure the car seat.

ATTENTION:

CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car

Seats must attach to the module of the strollers front seat. These models require

child tray and seat back adjustment to the most reclined position.

NOTE: To make seat position adjustments refer to step 6d.

CS01 EZ-Lift, CS02 EZ-Lift PLUS and

CS03 EZ-Lift PRO Infant Car Seats

Align the car seat module to the inner frame connectors. Latch the module

16)

•

into the stroller frame. Underneath the car seats handle hub, carefully

align it to the modular towers of the stroller frame. Press down firmly

for the click. ALWAYS ensure that the car seat is properly connected and

locked onto the stroller before each use by lifting up on the car seat handle

(Fig. 16a).

To avoid serious injury from falling,

"Click"

Fig. 16a

REMOVING THE CAR SEAT:

• NOTE: Set handle to the carry

position (Fig. 16b). Squeeze the

release handle located at the Top-

rear of the car seat and lift away

from the stroller (Fig. 16c).

INFANT CAR SEAT

Press

Fig. 16b

Fig. 16c