BABYTREND TS06 C Serie Manual De Instrucciones página 5

ASSEMBLY
ATTACHING THE SEAT
4) • Unfold the toddler seat fully (Fig. 4a).
• Insert both tabs of the toddler frame into
the toddler seat fabric (Fig. 4b).
• To assemble the toddler seat, connect the
lower tube into the inner slot of the seat
frame, until it clicks into place
(Fig. 4c). Repeat for the other side.
• Feed the strap through the tab to anchor
the seat fabric on the seat frame, ensure
the toddler seat is secured (Fig. 4d).
Repeat for the other side.
1
Fig. 4c
5
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 4a
Fig. 4b
2
Fig. 4d
• Attach the seat by lining up the seat
anchors on the side of the seat with
the anchors on the stroller frame and
pushing them together until they click
securely (Fig. 4e). The seat can face in
either direction, frontward or backward.
• Carriage Mode: Make sure the buckle
strap underneath the seat is loosend.
Then loosen the recline seat strap by
squeezing the adjuster and pulling
downwards (Fig. 4f). The carriage should
be fully extended before using.
NOTE: The footrest area should be
unbuckled (Fig. 4g).
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 4e
Recline
Seat Strap
Buckle Strap
Fig. 4f
Fig. 4g
6