Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-2018-003.book Page 15 Tuesday, January 21, 2014 1:55 PM
Safety Warnings for Routers
Hold power tool by insulated gripping surfaces, be-
cause the cutter may contact its own cord. Cutting a
"live" wire may make exposed metal parts of the power tool
"live" and shock the operator.
Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform. Holding the
work by your hand or against the body leaves it unstable
and may lead to loss of control.
The allowable speed of the router bit must be at least as
high as the maximum speed listed on the power tool.
Accessories that rotate faster than permitted can be de-
stroyed.
Router bits or other accessories must fit exactly in the
tool holder (collet) of your machine. Routing bits that do
not fit precisely in the tool holder of the machine rotate ir-
regularly, vibrate heavily and can lead to loss of control.
Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback when
the cutting tool jams in the workpiece.
Keep your hands away from the routing area and the
router bit. Hold the auxiliary handle or the motor hous-
ing with your second hand. When both hands hold the
machine, they cannot be injured by the router bit.
Never cut over metal objects, nails or screws. The rout-
er bit can become damaged and lead to increased vibra-
tions.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
Do not use blunt or damaged router bits. Blunt or dam-
aged router bits cause increased friction, can become
jammed and lead to imbalance.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for routing grooves, edges, profiles
and elongated holes as well as for copy routing in wood, plas-
tic and light building materials, while resting firmly on the
workpiece.
With reduced speed and with appropriate routing bits, non-
ferrous alloys can also be machined.
The light of this power tool (GOF 1250 LCE) is designed to il-
luminate the immediate work area of the power tool and is not
suitable for household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Right handle (insulated gripping surface)
2 Lock-on button for On/Off switch
3 Light ring (GOF 1250 LCE)
4 Tightening nut with collet
5 Router bit*
6 Spindle lock lever
7 Screw for parallel guide rods (2x)
8 Chip shield
9 Step buffer
10 Adjusting screws for step buffer
11 Guide plate
12 Seat for parallel guide rods
13 Base plate
14 Depth stop
15 Screw for depth stop fixing
16 Button for zero point of depth stop(GOF 1250 LCE)
17 On/Off switch for digital depth display (GOF 1250 LCE)
18 Adjustment range for depth-of-cut fine adjustment
19 Left handle (insulated gripping surface)
20 Display(GOF 1250 LCE)
21 Battery compartment cover(GOF 1250 LCE)
22 Release lever
23 Scale for depth-of-cut fine adjustment
24 Adjustment knob for depth-of-cut fine adjustment
25 Scale for depth-of-cut(GOF 1250 CE)
26 Slide with index mark(GOF 1250 CE)
27 Thumbwheel for speed preselection
28 On/Off switch
29 Extraction hose port
English | 15
1 609 92A 0LW | (21.1.14)
Publicidad
