Selco Genesis 3200 PME Instrucciones De Uso página 47

Introduce a description of the program (7).
- Select the required letter by rotating the encoder.
- Store the selected letter by pressing the encoder.
- Cancel the last letter by pressing button (1)
Cancel the operation by pressing button (2)
Confirm the operation by pressing button (3)
The storage of a new program on an already occupied
memory location requires cancellation of the memory
location by an obligatory procedure.
Cancel the operation by pressing button (2)
Remove the selected program by pressing button (1)
.
Resume the storage procedure.
3 Program retrieval
Retrieve the 1st program available by pressing button
.
Select the required program by pressing button
Select the required program by rotating the encoder.
Only the memories location occupied by a program
are retrieved, while the empty ones are automatically
skipped.
4 Program cancellation
Select the required program by rotating the encoder.
Delete the selected program by pressing button (1)
.
.
Confirm the operation by pressing button (2)
.
.
Confirm the operation by pressing button (1)
Cancel the operation by pressing button (2)
3.9 Interface personalisation
Allows the parameters to be customized on the main menu.
.
500 Allows the selection of the required graphic interface:
XE (Easy Mode)
XA (Advanced Mode)
XP (Professional Mode)
PROCESS PARAMETER
MMA
XE
TIG DC
MIG/MAG
Pulsed
MIG/MAG
MMA
XA
TIG DC
MIG/MAG
Pulsed
MIG/MAG
MMA
XP
TIG DC
MIG/MAG
Pulsed
MIG/MAG
.
.
.
.
( )
( )
( )
47