Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking and Checking Contents
Tools Needed
Combination Square
3/4" or 19mm Socket and
Socket Wrench
Unpacking
WARNING: To reduce the risk of injury from unex-
pected starting or electrical shock, do not plug the
power cord into a power source outlet during
unpacking and assembly. This cord must remain
unplugged whenever you are working on the saw.
This Miter Saw is shipped complete in one box.
List of Loose Parts
NOTE: Before beginning assembly, check that all parts
are included. If you are missing any part, do not assem-
ble the saw. E-mail us at info@ridgidwoodworking.com if
any parts are damaged or missing. Sometimes small
parts can get lost in packaging material. Do not throw
away any packaging until saw is put together. Check
packaging for missing parts before contacting RIDGID. A
complete parts list (Repair Parts) is at the end of the
manual. Use the list to identify the number of the missing
part.
A
B
Combination Wrench,
1/4" Hex "L" Wrench
with #2 Phillips tip
(supplied)
C
Combination Square Must be True
Draw Light
Line on Board
Along this Edge
Should be no Gap or Overlap when Square
is Flipped Over in Dotted Position
WARNING: Although compact, this saw is heavy. to
reduce the risk of back injury, get help whenever
you have to lift the saw.
1. Remove the miter saw from the carton by lifting the
saw with the carrying handle.
2. Place the saw on a secure, stationary work surface
and look the saw over carefully.
The following parts are included:
Part or Assembly
A Basic Saw Assembly...............................................1
B Table Extension.......................................................1
C Bag, Extension Hardware .......................................1
D Dust Bag .................................................................1
E Dust Elbow ..............................................................1
F Work Clamp ............................................................1
G Owners Manual .......................................................1
D
F
45
Straight Edge of
Board 3/4" Thick
This Edge Must be
Perfectly Straight
Qty.
E
G
Publicidad
