Parkside PDSA 20-Li B2 Manual De Instrucciones página 31

any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied­plugs­and­matching­outlets­will­
reduce risk of electric shock.
b) Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators, ranges
and refrigerators. There is an in-
creased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering­a­power­tool­will­increase­the­
risk of electric shock.
d) Do not abuse the cord. never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged­or­entangled­cords­increase­
the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operation of the power tool
in a damp environment is una-
voidable, please use a residual
current circuitry. The use of a re-
sidual current circuitry reduces the risk
of an electric shock.
3) PERSOnAL SAFETy
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the influ-
ence of drugs, alcohol or medi-
cation. A moment of inattention white
operating­power­tools­may­result­in­
serious­personal­injury.­
b) Use personal protective equip-
ment. Always wear eye protec-
tion.­Protective­equipment­such­as­
dust­mask,­non-skid­safety­shoes,­hard­
hat,­or­hearing­protection­used­for­
appropriate­conditions­will­reduce­per-
sonal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying
the tool.­Carrying­power­tools­with­
your­finger­on­the­switch­or­energising­
power­tools­that­have­the­switch­on­
invites­accidents.­
d) Remove any adjusting key or
wrench before turning the pow-
er tool on. A wrench or a key left at-
tached­to­a­rotating­part­of­the­power­
tool­may­result­in­personal­injury.­
e) Do not overreach. Keep proper
footing and balance at all times.
This­enables­better­control­of­the­pow-
er­tool­in­unexpected­situations.­
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewellery or long
hair­can­be­caught­in­moving­parts.­
g) If dust extraction and collection
devices can be installed, make
sure that these are connected
and used correctly. Use of dust col-
lection­can­reduce­dust-related­hazards.­
GB MT
31