• Mixthecropprotectionproductexactly
according to the manufacturer's instruc-
tionsandfollowthefillinginstructions
inthecropprotectionproduct'sinstruc-
tions for use.
• Followtheinstructionssuppliedwith
thecropprotectionproducttoprevent
contaminationoftheenvironment.
RESIDUAL RISKS
Evenifproperlyoperatingandhandlingthis
electric tool, some residual risks will remain.
Duetoitsconstructionandbuild,thiselectric
toolmaypresentthefollowinghazards:
a. Lungdamageifasuitableprotective
mask is not worn.
b. Contact with hazardous substances.
Spraymaterialscanbeharmfulifthey
are inhaled, swallowed or come into
contact with skin or eyes. Follow the in-
structionsandwearsuitableprotective
equipment.
Observe the safety informati-
on and notes on charging
and proper use as shown in the in-
struction manual for your battery
and charger from the Parkside
X 20 V TeAm or X 12 V TeAm series.
A detailed description of the char-
ging process and further informa-
tion can be found in the separate
operating instructions.
Preparation
Warning!
Switch off the device and re-
move the battery before any
assembly work.
Assemblingthespray
lance
•
Insertthespraylance(7)intothecon-
nectingpiece(23)ofthemetalpipe(3)
andscrewittightwiththeclampingnut
(22).
Attention! Be sure to check the hose
connections.
Anyleaksmustberepairedimmedi-
ately.Thedeviceisnolongertobe
used until then.
Thespraylancecanbeinserted
intotheholder(6)fortransportor
when not in use.
Assembling the carrying
strap
Acarryingstrap(9)canbehookedontothe
sidesofthecontainerforfatigue-freework.
1. Todothis,slidetheopeningsofthe
carryingstrap(9)overthestrapfaste-
ning (5) on both sides of the container
(10).
2. Adjustthedesiredstraplengthusing
the length adjuster (24).
Foroptimalwearingcomfort,were-
commendkeepingthestrapattachment
(5)athiplevelifyouwearthecarrying
strap(9)overyourshoulder.
GB
MT
35