Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Hose storage rack may come pre-installed on some models.
8. Insert the push/pull handle into the handle socket mounted on the tank body. Push down until
9. Align the two cord wrap hooks with the mounting holes on the push/pull handle, and secure the
10. For convenient accessory storage, install the tool storage bag onto the push/pull handle. Attach
14. Place the powerhead back on the collection tank and secure into place using the latches
15. Insert the locking end of the hose into the vacuum port on the collection tank and turn to lock
16. The included attachments lock together to prevent them from detaching during use. Connect
the desired attachment onto the end of the hose or extension wand by aligning the tabs and
Note that a static discharge chain is attached to the bottom of the tank. It is normal for this chain
to drag on the ground. Operating the vacuum in dry conditions can build up static, and the chain
helps dissipate any build-up by allowing it a path of least resistance to the ground.
NOISE DIFFUSER
For quiet operation during vacuuming, install the noise diffuser into the blower port by inserting the
POLARIZED PLUG
Do not change the plug in any way. Double insulation
grounded power cord and grounded power supply system.
eliminates the need for the three-wire
9
Publicidad
