Using The Shoulder Harness; Cutting With A Nylon Head - Ducati DBC 3300M Manual De Instrucciones

English
Owner's manual

8. USING THE SHOULDER HARNESS

1. Assemble and adjust the shoulder harness
and belt, as shown.
2. Adjust the shoulder-harness button, and
move the hook to your waist, then adjust
the belt(If there is a belt).
3. Hang the latch tab on the harness hook.
4. If the brush cutter does't balance,
then adjust the harness hanger, and the
handlebar, until it balances.
WARNING
The hook is situated at your right hip, and the
quick-release latch is situated at the outside.
38
Before using, please check the shoulder harness
and confirm it is OK. If in danger, please stop the
brush cutter immediately,and pull the quick-relea-
se latch tab, the brush cutter will separate from
your body.
5.To quickly detach the brush cutter from
6.Insert the latch tongue in the slot of the
CAUTION

9. CUTTING WITH A NYLON HEAD

Line head rotates in a counter CLOCKWISE
direction.The CUT-OFF KNIFE will be on the
right side of the debris shield
WARNING
the harness,pull the quick-release latch tab
upward;
quick-release latch to reattach the brush
cutter to the harness.
DANGER