Cutting With A Blade - Ducati DBC 3300M Manual De Instrucciones

English
Owner's manual
WARNING
Do not trim in any area where there are strands of
fencing wire, wear protective safty protecting.
Do not cut where you cannot see what the cutting
device is cutting.
40

10. CUTTING WITH A BLADE

Cutting with a blade
There are many different types of blades,
however the two most commonly used are the
following.
BRUSH BLADE is used for cutting brush and
weeds up to 3/4" in diameter. Only 255mm
3-blade can be used in this type of brush
cutter.
DANGER
DO NOT USE A BRUSH CUTTER FOR CUTTING
TREES.
Line head rotates in a counter CLOCKWISE
direction.The CUT-OFF KNIFE will be on the
right side of the debris shield.
Do not cut with dull, cracked or damaged metal
blade.
Before cutting growth, inspect for obstructions
such as boulders, metal stakes or strands of wire
from broken fences. If an obstruction cannot be
removed, mark its location so that you can avoid
it with the blade. Rocks and metal will dull or da-
mage a blade. Wires can catch on the blade head
and flap around or be thrown into the air.
WARNING
WARNING
DANGER
DANGER