Mounting And Placement - Master audio PRO Serie Manual Del Usuario

Master Audio

3. MOUNTING AND PLACEMENT

For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1. Placement
The "Full Range" cabinets should be located in a high position (between two or three
meters), slightly inclined to the audience. If the loudspeakers are located too low, the
listeners at the end of the room will not hear a good sound quality. .
Fig.13. Flying placement
They may be located together, in cluster form, one next to the other, taking
advantage of their trapezoidal shape . They may be also located one on top of the
other one, always trying to maintain the slight inclined orientation that guarantees the
best coverage both in horizontal or vertical.
It is advisable to locate the low units on the floor as they can take advantage of the
so-called "floor-effect", thus increasing the response in the low frequencies.
If possible, place the subwoofers under the same acoustic axis used for the satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
3.2. Tripod use
The P-26A / P-10A / P-12A / P-15A / P-212A / P-15SMA are equipped with a tripod
socket for use with Standard 35mm tripods.
Do not use the tripod on non-flat floors and be careful not to raise the cabinets too
high on the tripod, as they may become unstable.
3.3. Live applications (mobile)
For a mobile application, whether it is an outdoor or indoor installation, the common
location is to place the bass units (one or two per channel) on each side of the stage.
PRO Series.Version 1.5 Nov10
41