Mounting And Placement - Master audio LN Serie Manual Usuario

Master Audio
WARNING!!!!: In order to allow a bridge connection between cabinets, each one of
them has been provided with two Speakon connectors that allow the Input / Output
function indistinctly. Terminal Pins +1/-1 must be always used, disregarding the +2/-2
which are not internally connected.

3. MOUNTING AND PLACEMENT

For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1. Placement
The "Full Range" cabinets should be located in a high position (between two or three
meters), slightly inclined to the audience. If the loudspeakers are located too low, the
listeners at the end of the room will not hear a good sound quality.
.
Fig.8. Flying placement
They may be located together, in cluster form, one next to the other, taking
advantage of their trapezoidal shape . They may be also located one on top of the
other one, always trying to maintain the slight inclined orientation that guarantees the
best coverage both in horizontal or vertical.
It is advisable to locate the low units on the floor as they can take advantage of the
so-called "floor-effect", thus increasing the response in the low frequencies.
If possible, place the subwoofers under the same acoustic axis used for the satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
3.2. Tripod use
The LN-10X, LN-12X and LN-15X models are equipped with a tripod socket for use
with Standard 35mm tripods.
Do not use the tripod on non-flat floors and be careful not to raise the cabinet too high
on the tripod, as it may become unstable.
3.3. Full range cabinet + subwoofer use
The LN-15BR, LN-18BR and LN-18SW are equipped with a M20 Plate for a 35mm
distance Rod. We can use it to place over the subwoofer the models that are
equipped with the tripod socket (LN-10X, LN-12X and LN-15X). Be careful not to use
this system on non-flat surfaces as it may become unstable.
LN Series. Versión 1.5 Nov 09
28