Mounting And Installation - Master audio Xcellence Serie Manual Usuario

Master Audio
In the mains input an electronic circuit compares the input voltage with a reference
value. When the input exceeds 250 Volts, the circuit reacts by blocking the input
tension until it returns to its correct limits (230V +/- 10%).
When the overvoltage LED lights up red, the unit stops running, until the correct
voltage is re-established.
Generally the cause of such an anomaly tends to be a neutral voltage drop or
incorrect connection of the equipment to 400V supply. Whenever the overvoltage
LED lights up, check the tension of the electrical phases: other devices in the sound
system are also at risk of electrical fault and severe damage.

10. MOUNTING AND INSTALLATION

Whenever possible, mount the Full Range units in a high position (between 2 and 3
meters above ground), angled towards the audience. If the units are mounted close to
the ground the back row listeners will receive low quality sound.
Fig.20. Orientation of Xcellence full range units
The X12CE, X15CE models incorporate a 35mm pole mount socket for standard
tripod in the upper and lower sides. The X15LTE and X15LTP incorporate a 35mm
pole mount socket for standard tripod in the lower side. To use the socket, unscrew
the four bolts on the central face plate.
Fig.21. Socket for tripod (X12CE, X15CE)
Fig.22. Top side (left) and socket for tripod (right) for X15LTE / X15LTP
Xcellence "E "Series. Ver1.3 Des13 23