Stihl FS 560 C Manual De Instrucciones página 41

At temperatures above +70°F (+20°C)
2
Always return the shutter (2) to the
N
summer position.
NOTICE
Do not operate the machine in the winter
position at temperatures above
+70°F (+20°C) because there is
otherwise a risk of engine running
problems and overheating.
At temperatures below +14°F (-10°C)
In extreme wintry conditions
Temperatures below +14°F (-10°C)
–
Powder or drifting snow
–
it is advisable to use the optional "cover
plate kit".
FS 510 C, FS 560 C
5
The cover plate kit contains the following
parts for converting the power tool:
4 Cover plate partially blanks off the
slots in the starter housing
5 Synthetic fabric filter element for the
air filter
Instructions for converting the
–
machine
After installing the cover plate kit:
Set the shutter (2) to the winter
N
position.
At temperatures above +14°F (-10°C)
Remove the parts of the cover plate
N
kit and refit the standard parts for
summer operation.
Depending on the ambient temperature:
Set the shutter (2) to the summer or
N
winter position.
Cleaning the Air Filter
Loosen filter cover mounting
N
screws.
Remove the filter cover.
N
Clean away loose dirt from around
N
2
the filter (5) and inside the filter
cover.
Knock the filter (5) out on the palm
N
of your hand or blow it clear with
compressed air from the inside
outwards.
4
In case of stubborn dirt or sticky filter
fabric:
Wash the filter in a clean, non-
N
flammable solution (e.g. warm
soapy water) and then dry.
Always replace a damaged filter.
English
39