Publicidad
Idiomas disponibles
Idiomas disponibles
4. Preset Time: Press the Preset Time button to set the preset timer for up to 24 hours. Adjust the time in 30-
minute increments using the " + " and " - " buttons, or by continuing to press the Delay Time button until your
preferred delay time is selected.
5. Keep Warm/Cancel: For most presets, after your cooking cycle is complete, it will automatically switch to Keep
Warm mode. Press the Keep Warm/Cancel button at any time to stop the cooking cycle.
6. Automatic Start: Once you have selected your desired cooking preset or function and adjusted as needed,
simply step away. Your pressure cooker will automatically begin the cooking cycle after about 5 seconds unless the
delay timer has been set.
7. NOTE: Each cooking program and function is set with a default time, temperature, and pressure level that may
be adjustable. Refer to Cooking Programs to see which settings are adjustable and not adjustable.
Functions
1. Sauté
This is a 20-minute program (00:20) for Sauté food. The normal function of this function is no pressure cooking.
You can also use your pressure cooker to sauté foods such as meat. The program time can be adjusted between 1
and 40 minutes, with a default setting of 20 minutes. This is generally adequate for any sauté task. In this example,
we will sauté two pork chops. To do this successfully, follow the steps below: Wash the chops and pat them dry.
Remove the lid on your pressure cooker. Connect your pressure cooker to power, ensuring the inner pot is installed.
The pressure cooker will beep once. Press the Sauté button.
NOTE: DO NOT add oil at this point. The Display will indicate a flashing "20", the default time. After 5 seconds, it
will show a steady "20" and the Pot will start to heat. When the countdown on the Display decreases to "19",
add a small amount of oil to the inner pot. Wait a further 2 minutes and, at "17", place your pork chops into the pot.
Use a wooden or silicone spatula and turn your chops as required to ensure even browning. When you are satisfied
with the result, press the Keep Warm / Cancel button until the display shows: "- - - - ". Switch off the pressure
cooker and unplug it. When cool, clean as per the instructions in the "Cleaning and Maintenance" section.
Note: This function is a high temperature function, and the fault of E3 will not be detected.
2. Rice/Risotto
This is an 8-minute program for cooking rice and grains. Position the removable cooking pot in the cooker. Add
13
Publicidad
