Publicidad
Idiomas disponibles
Idiomas disponibles
3. Select a cooking method by pressing the corresponding button.
Once the button is pressed, the display will show the default pressure cooking time.
Cooking times may vary depending on the different cooking program selections.
Cooking time may vary slightly depending on the quantity of food and liquid and textures
of food.
The cooking time shown below is for reference only. (e. g. food amount +water reaches
scale between 1/5 to 3/5 inside the inner pot):
Cooking time = heating time + default pressure cooking time.
* Will change according to the amount of food. More food will imply more time needed to
cook.
When you select a function and enter into the program, the display will show the default
pressure cooking time (for rice is 8 minutes), and the pressure cooker starts to heat up.
The default pressure cooking time shown on display will NOT start counting down until
the food or liquid has heated up and the pressure cooker has started pressure cooking.
Heating time normally takes more than 10 minutes depending on food quantity.
4. The menu indicator light will flash for 5 seconds before starting the menu. After 5
seconds, the indicator light will stop flashing to indicate that the cooking process has
started.
During this 5-second interval you can change the default cooking time by pressing the
plus (+) or minus (-) button on the panel.
At any time during the process, the program can be canceled by pressing the
Cancel/Keep Warm button. The pressure cooker will then go into Standby mode.
5. As the pressure increases inside the cooker, the floating valve will pop up.
At this point pressure cooker begins. The lid is now locked and cannot be opened.
7
Publicidad
