Publicidad
Idiomas disponibles
Idiomas disponibles
TURN ON / OFF THE INSTRUMENT
Under off status, press button
simultaneously and stand by for measurement.
To turn the device off: press button
device remains inactive for 150 seconds, it will shut off automa-
tically. (User can set this limited time in the menu, please refer to
the menu/setting part)
UNIT SETTING
Shortly press button
, enter setting menu.
Press button
or
to move the red frame to the item
, then press
, the frame turns to be green, user can select
the unit by press button
there are 8 unit for selection.
length
, device and laser get starting
for 3 seconds. If the
or
. The default unit is: 0.000m,
area
volume
REFERENCE POINT
Press
key to change the reference point. There are four
reference points: top, screw, bottom and the end piece.
SINGLE DISTANCE MEASUREMENT
Turn on the laser beam by short pressing of the button
under measuring mode; Press the button
measurement of length, then the measured results displayed in
the major display area.
The latest 3 pcs of record will be shown in the auxiliary display
area. Short press button
CONTINUOUS MEASUREMENT
Press and hold the
button under measuring mode to enter
into the continuous measuring mode. Maximum and Minimum
again for single
. to delete the history results.
17
Publicidad
