METRICA FLASH c100 Manual Del Usuario página 22

MULTI DIRECTION ELECTRONIC BUBBLE
Long press button
Press button to exit.
CAMERA
When the users cannot find the laser spot under strong sunshine,
please turn on camera to help you to make measurement.
1. Short press button
measuring- stay mode
2. Make the cross which is on the screen exactly point to your
target, then start measuring (please refer to the single mea-
surement chapter)
3. Short press button
to exit the camera. If there is measurement result short press
button twice to exit;
22
, screen shows:
Inclination X-Axis
Inclination Y-Axis
to turn on the camera under single
once, or short press button
4. Short press button to turn on the camera under area,
volume and Pythagoras mode, with the laser on.
Short press button to measuring, short press button
to exit and the measuring result will be shown on the screen.
5) Continuous measuring with camera: turn on the camera, then
long press the button
mode. The measuring result will be shown on the screen.
DELAY MEASUREMENT
Long press button , delay time shows on the top of screen
in Seconds. Short press
value 60s, Min value 3s. Then short press button
the delay measuring function.
to enter continuous measuring
Inclination X-Axis
Inclination Y-Axis
Target
Measure
or p to adjust the time. Max
to start