Publicidad
Idiomas disponibles
Idiomas disponibles
Using the dryer
Control Lock
D
You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have
started a cycle. Children cannot accidentally start the dryer by touching buttons with this option selected.
To lock/unlock the dryer controls, press and hold the ecoDry button for 3 seconds. The control lock icon will
flash while locking/unlocking, stay on when locked, and turn off when unlocked.
NOTE: The Power button can still be used when the machine is locked.
Drying
Sensor cycles automatically determine fabric dryness.
E
Cycles
Timed cycles run for the selected time.
SANITIZE
This option reduces certain types of bacteria including: Staphylococcus aureus, Pseudomonas
aeruginosa and Klebsiella pneumoniae. The anti-bacterial process occurs when high heat is
used during a portion of the drying cycle; cool down also will be longer to protect you from a hot
garment.
NOTE: Do not use this cycle on delicate fabrics.
BULKY
For large coats, bed spreads, mattress covers, sleeping bags, and similar large/bulky items such
as blankets, comforters, jackets, and small rugs.
TOWELS/
For most towels and linens.
Sheets
NORMAL/
For cottons and most linens. NOTE: ENERGY STAR
Cottons
Cottons with default settings (Dry level, Hot temperature and ecoDry).
MIXED LOAD
For loads consisting of cottons and poly-blends.
DOWNLOADED
Option with additional cycles available through your GE Appliances SmartHQ App:
Casual (Default): Wrinkle care and permanent press items.
Active Wear: Special sport items that need extra drying care.
Warm Up: Provides 10 minutes of heating to warm up clothes.
STEAM Dewrinkle: For use with larger loads than 9-13 garments. Ideal for loads left in the
dryer for an extended time.
DELICATES
For delicate items, special-care fabrics and knits.
QUICK DRY
For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands. NOTE: On some models, the
time remaining in the cycle will show counting down in the display.
JEANS
For jeans.
TIMED DRY
Set the Cycle Selector at the desired drying time.
WARM UP
Provides 10 minutes of warming time to warm up clothes.
AIR FLUFF
Provides 10 minutes of tumbling time with no heat. NOTE: On models without AIR FLUFF
cycle, select TIMED DRY and set Temp to No Heat.
STEAM
A cycle with two options available through the GE Appliances SmartHQ App:
(on some models)
STEAM Refresh (Default): For slightly wrinkled dry garments. Significantly reduces
wrinkles. It's recommended for small loads (3-5 garments).
NOTE: Steam cycles are not intended for use with towels.
NOTE: A single extremely light fabric item may need to have an additional item included in
the STEAM Refresh cycle to achieve optimum results.
ecoDry
F
Available for BULKY, TOWELS/Sheets, NORMAL/Cottons, MIXED LOAD, JEANS, and DELICATES. When
the ecoDry button is pressed, cycle settings change to reduce the total energy consumption of the selected
sensor cycle. NOTE: Cycle times will change when ecoDry is selected. The ecoDry option will default to on
for NORMAL/Cottons. For optimal energy savings, turn ecoDry on. For optimal drying times, turn ecoDry
off. NOTE: Energy savings will vary across loads and cycles.
49-3000244 Rev 7
®
models are tested on NORMAL/
7
Publicidad
