Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY RULES
This appliance is not fitted with "Atmosphere sensing device".
To be used outdoors use only and in good weather condition (no rain, or windy condition).
The use of this appliance in enclosed areas can be dangerous and is PROHIBITED.
Children and adults should be aware of the high operating temperatures of areas above the post when
operating this appliance. Children should be carefully supervised when in the vicinity of the appliance.
NEVER hang anything, including clothes or any other flammable items, on this appliance.
DO NOT operates this appliance unless it is fully assembled with all its parts.
Minimum clearance is 1 m from combustible materials and or any wall side (left, right or back).
Appliance is not fitted with any guard.
Do not stay too closed to the appliance while in operation.
MAINTENANCE AND CLEANING
To enjoy years of outstanding performance from your appliance, regular servi-
ces of the appliance is mandatory as followings:
The appliance should be inspected before at least one time a year by a Qua-
●
lified Service only. More frequent cleaning may be required according to the
use of the appliance.
Keep exterior surfaces clean, free and clear from combustible materials.
●
Use warm soapy water for cleaning. Never use flammable or corrosive clea-
●
ning agents.
While washing your unit always makes sure to keep the area around the bur-
●
ner assembly dry . If the gas control is exposed to water in any way, DO NOT
tries to use it. It must be replaced.
Burner and LPG compartment circulating air passageways of the appliance must be kept clean.
●
Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean. Signs of pos-
●
sible blockage include:
Gas odor with extreme yellow tipping of flame / Appliance glow is excessively uneven / Appliance makes
●
popping noises.
Spiders and insects can nest in burner or orifices. This dangerous condition can damage the appliance
●
and render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may
help clear away smaller particles.
After the burner and crystals are completely cooled down, remove it from the bowl and use a soft brush
●
to get rid of the mild stains, loose dirt and soil. Wipe with a soft cloth.
Clean the bowl and afterward put crystals again in proper position.
●
For proper cleaning, a vacuum cleaner can be used.
●
Note: In a salt-air environment (such as near the sea), corrosion occurs more quickly than
normal. Frequently check the corroded areas and repair them promptly. Stubborn stains, dis-
coloration and possibly rust pitting can occur from exposure to harsh outdoor conditions. Be
careful not let any powder or solvent come in contact with painted or plastic components as
damage may occur.
20
Manual ATALAYA.indd 20
TECHO
100 cm
CEILING
100 cm
TETO
100 cm
PLAFOND
100 cm
10/7/19 9:43
Publicidad
