D. Place the plastic tray ( H ) to the fireplace designed place.Then carefully place crystals onto the plastic tray as
illustrated. Apply an even layer from side to side. Figure 2, Figure 3.
Glass Removal
Figure 2.
Operation
Read and understand this entire owner's manual, including all safety information, before
plugging in or using this product. Failure to do so could result in electric shock, fire, serious
injury, or death.
Power
Plug the power cord into a 220-240 Volt grounded outlet (see IMPORTANT SAFETY INFORMATION on Pages 2).
Make sure the outlet is in good condition and that the plug is not loose. NEVER exceed the maximum amperage
for the circuit. DO NOT plug other appliances into the same circuit.
Methods of Operation
This electric fireplace can be operated by the CONTROL BUTTONS, located on the RIGHT SIDE
panel of the fireplace (see figure below), or by the battery-powered REMOTECONTROL. The operation and
functions of the two methods are the same.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and heed all
Figure 1.
Figure 3. (Crystal media)
14