Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The cappuccinatore won't
start.
Cappuccino is too liquid
and/or contains irregular
bubbles.
The frother arm turns in
an irregular manner/is not
aligned correctly when
used.
The milk is not setting
properly or is too liquid.
The milk is cold.
The milk reaches the
correct temperature very
quickly, before it has had
time to froth suitably.
For problems not covered in the table or if the solutions given do not resolve the problem please contact a Lavazza
For electricity specifications please refer to the data plate found on the appliance.
· Total power:
15W
· Cup capacity:
120 cc
TROUBLESHOOTING
POSSIBLE CAUSES
»
Cappuccinatore not
connected to power source.
»
Transformer doesn't work.
»
Power unit is faulty.
»
The frother is incorrectly
positioned.
»
The steam spout is not
connected properly.
»
The frother arm is deformed.
»
More steam was dispensed
than necessary.
»
The quantity of milk used was
either under the minimum
level or greater than the
maximum levels suggested.
»
No steam has been
dispensed.
»
The connection between the
espresso machine and the
cappuccinatore is blocked.
»
The milk being used was
room temperature or too
warm
customer services centre.
TECHNICAL CHARACTERISTICS
SOLUTION
»
Check it is plugged in correctly and
that the electricity socket is functional.
»
Contact customer services.
»
Contact customer services.
»
Check the frother connection.
»
Check the insertion of the transparent
tube in the machine and in the steel
tube.
»
Replace the frother arm by contacting
customer services.
»
Keep an eye on the light indicator
and, as soon as it comes on, stop the
steam flow.
»
Respect the recommended quantities.
»
Check the machine's steam function
(check machine instructions booklet).
»
Check that steam comes out of the
steam spout. Direct the steam spout
towards the machine cup-support
rack when testing.
»
Use cold milk, refrigerated at 6-8°C.
2006/42 CE - 2004/108 CE - 2006/95 CE
E N
15
Publicidad
