Frigelux CCO303BF Manual De Uso página 20

Attention! Cleaning and maintenance
▪
Before any maintenance, unplug the appliance and cut off the power.
▪
Do not clean the device with metal objects, steam system, volatile oils, organic solvents or
abrasive components.
▪
Do not use sharp or pointed objects to remove the ice. Use a plastic scraper.
Installation Important!
▪
For electrical connection, carefully, follow the instructions given in this manual.
▪
Unpack the appliance and check if there are damages on it. Do not connect the appliance if
it is damaged. Report possible damages immediately to the place you bought it. In this case
retain packing.
▪
It is advisable to wait at least 24 hours before connecting the appliance to allow the oil to
flow back in the compressor.
▪
Adequate air circulation should be around the appliance, lacking this leads to overheating.
To achieve sufficient ventilation, follow the instructions relevant to installation.
▪
This refrigerating appliance is not intended to be used as a built-in appliance
▪
Wherever possible the back of the product should not be too close to a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent the risk of a fire, follow the
instructions relevant to installation.
▪
The appliance must not be located close to radiators or cookers.
▪
Make sure that the mains plug is accessible after the installation of the appliance.
ENERGY SAVINGS
▪
To reduce the power consumption of your device:
▪
Install it in a suitable location (see "Installing your appliance").
▪
Keep the doors open for as short time as possible.
▪
Do not put hot food into your device.
▪
Ensure the optimal functioning of your device by periodically cleaning the condenser (see
"Routine maintenance of your appliance").
▪
Ensure the optimal functioning of your device by not allowing too much frost accumulate in
the freezer (defrost it when the frost thickness exceeds 5-6 mm).
▪
Periodically check the door seals and make sure they always close effectively. If this is not
the case, please contact your after-sales service.
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to be used
as efficiently as possible by the refrigeration unit.
Service and spare parts
▪
Any electrical work required to do the servicing of the appliance should be carried out by
qualified electrician or competent person.
20