Descargar Imprimir esta página

KRESS KC100 Serie Manual Del Usuario página 9

Cortadora de césped sin cable
Ocultar thumbs Ver también para KC100 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Fitting the shoulder strap (Sold Seperately)
(See Fig. C)
1. Adjust the length of shoulder strap to make sure
that the carabiner is about a hand's width below
the top of your hip.
2. Connect the carabiner of the accessory shoulder
strap to the mounting point on the shaft of the
trimmer.
C
Installing & removing the battery pack
(See Fig. D1, D2)
D1
D2
1. Slide the battery pack into the battery
compartment until you hear a click.
2. Press the battery pack release to release battery
pack from your tool.
Connecting with the backpack harness
(See Fig. D3)
The trimmer can be connected with an accessory
backpack harness (not supplied). Refer to the
backpack harness manual for more information.
D3
TESTING THE TRIMMER AND BATTERY
(See Fig. E)
Checking the controls
Operator Presence Switch and Throttle Trigger
1. Remove the battery.
2. Try to press the Throttle Trigger. If the Throttle
Trigger can be pressed without depressing
the Operator Presence Switch, the Operator
Presence Switch is defective. Stop using the
trimmer and contact the service agent.
4. Hold and press the Operator Presence Switch
first, then press the Throttle Trigger.
5. Release the Throttle Trigger and the Operator
Presence Switch. If the Throttle Trigger or the
Operator Presence Switch is stuck and cannot
spring back to its original position. Stop using the
trimmer and contact the service agent.
E
Checking the display
1. Insert the battery.
2. Hold and press the On / Off Switch.
b
a
EN
9

Publicidad

loading

Este manual también es adecuado para:

Kc100