Stahlwille TORSIOMAX 775/3 Instrucciones De Utilizacion página 30

Attaching the handle —
No 775/100
TORSIOMAX No 775/100 can be used to
torque screws up to 10 N·m. This may
result in relatively high forces being
applied to the handle of the torque
screwdriver. Use the detachable handles
to facilitate the application of force at
higher torques.
→
Attach both the additional handles
firmly to the handle of the torque
screwdriver.
Choice of bits
This TORSIOMAX torque screwdriver is
suitable for the following applications:
BITS screwdriver inserts and extensions
with an E 6.3 mm (1/4
will need BIT holder No 3115/2 for use
with BITS screwdriver inserts with C4.
C AUTI O N
Risk of injury on use of
incorrect inserts.
→
Use only standard-
compliant inserts whose
form and design are
suitable for the intended
use.
→
Make sure that the
permissible load capability
of the insert exceeds the
capacity of the torque
screwdriver.
"
) outer hex. You
29