Brandani Techno 54664 Manual De Instrucciones página 41

rod towards the mounting. Then press it towards the back until the guide rod is fully engaged
in the mounting. Check that it is seated correctly and that it opens and closes properly.
CLEANING THE FRYING BASKET:
REMOVING THE HANDLE:
· Press the handle (G) firmly towards the inside of the basket.
· Squeeze the angle ends together and pull put the handle(G).
Wash the frying basket (D) and the handle (G) with warm, soapy water .Then rinse well with
clear water and dry thoroughly.
TROUBLE-SHOOTING
DEFECT:
The appliance dose not function.
Appliance does not heat.
If your device has a defect not stated in the troubleshooting chart above, please contact our
Customer Service Department. Our Customer Service staff is happy to help you.
CAUSE:
The mains lead is not
connected to the shock
proof socket.
The overheating
protector has switched
the appliance off.
REMEDY:
Connect the
mains lead to the
shockproof socket.
Remove the plug
from the shockproof
socket and allow
the appliance to
cool down to room
temperature.
INSTRUCTION MANUAL | 41 | 41