LEGRAND care NOVO Go Manual Del Usuario página 13

7 Charge NOVO Go
If NOVO Go is set to off (for example if the battery has not been charged), it
automatically sets to on when you connect to a charger.
If the battery icon slowly flashes red, it is necessary to charge the battery.
7.1 Charge with USB Charger
1. Connect the USB cable to the AC power adapter and attach the magnetic charger
to the back of NOVO Go.
2. Connect the AC power adapter to the wall socket. NOVO Go gives a short sound.
The battery icon flashes green until the battery is fully charged.
3. If necessary, do a check of the status during the charging, refer to
8.2 Status
4. When NOVO Go is fully charged, the battery icon stays on for 1 minute and then
it goes off.
RELATED CHAPTER(S)
3 Get Started with NOVO Go
NOVO Go User Manual NE41 21002-02 (EN)
Check.
▶ 1 minute ▶
11