LEGRAND care NOVO Go Manual Del Usuario página 8

3 Get Started with NOVO Go
1. Remove NOVO Go from the box.
2. Examine the contents for missing or defective items. If something is missing or
defective, speak with your Legrand Care distributor.
3. Attach an accessory to NOVO Go, refer to
4. Charge NOVO Go, refer to
5. The software updates automatically. The Alarm button flashes yellow and the
Network icon flashes green for up to 10 minutes.
6. After the Alarm button goes off, continue with step 7.
7. Do a status check of NOVO Go, refer to
8. Do an operational test of NOVO Go, refer to
9. If the test result is unsatisfactory, speak with your Legrand Care distributor.
10. If the test result is satisfactory, you are good to go!
3.1 Get started with NOVO Go + NOVO Go DOCK
Refer to NOVO Go DOCK User Manual.
NOVO Go User Manual NE41 21002-02 (EN)
4 Accessory.
7.1 Charge with USB
8.2 Status
5 Send Alarm with NOVO
Charger.
Check.
Go.
6