LEGRAND care NOVO Go Manual Del Usuario página 9

4 Accessory
The same procedure is applicable to the two accessories.
4.1 Attach Accessory
1. Put NOVO Go on something stable, with the alarm button side up.
2. Position the accessory above NOVO Go.
3. Make sure that the holes on the side
the loudspeaker
4. Push until you hear clicks on the two sides.
RELATED CHAPTER(S)
3 Get Started with NOVO Go
4.2 Remove Accessory
1. Hold NOVO Go with your hands.
2. Use your thumbs and push the device down.
NOVO Go User Manual NE41 21002-02 (EN)
.
Click
point in the direction of
Click
7