LEGRAND care NOVO Go Manual Del Usuario página 28

3.1 Set NOVO Go DOCK to On
1. Open the lid on the bottom of NOVO Go DOCK.
2. Press and hold the On/Off button
top of NOVO Go DOCK flashes and then goes off.
3. After approximately 3 seconds the Alarm button comes on and stays red.
NOTE:
5.1 Set Alarm Button Lighting to
4. Close the lid.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
3 Get Started with NOVO Go DOCK
3.2 Set NOVO Go DOCK to Off
1. Open the lid on the bottom of NOVO Go DOCK.
2. Press and hold the On/Off button
3. After 3 seconds NOVO Go DOCK makes a sound and the Alarm button goes off.
4. Close the lid.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
3.3 Pair NOVO Go DOCK and NOVO Go
Pair NOVO Go DOCK and NOVO Go manually as follows:
1. Make sure that the holes on the side
2. Put NOVO Go in NOVO Go DOCK.
NOVO Go DOCK User Manual NE41 21003-02 (EN)
This applies to standard configuration, for alternative settings, refer to
for more than 3 seconds. The buttons on the
On/Off.
.
point up.
7