Rational iVario 2-XS Instrucciones De Modificación página 14

1 | MI_2321: Retrofit 4-way relay PCB XS, 2-S
Number
1
2
3
4
5
6
7
8
9
10
11
12
General information
Enter the installation of the component on the service level ("Component
replacement" tab). This is an integral part of the maintenance history.
Target group
This document is intended for skilled technicians, who have been certified
n
by the manufacturer after attending training and safety instructions.
Installation, inspection, maintenance, and repair work must only be carried
n
out by trained technicians.
It is recommended that only technicians authorised by the manufacturer
n
perform inspection, maintenance and repair work.
The unit may not be used, cleaned, or maintained by children. The unit may
n
not be used for play. This is prohibited even under supervision.
The unit may not be used, cleaned, or maintained by people with limited
n
physical, sensory, or mental capacity or those without the necessary ex-
perience or knowledge, unless such people are supervised by a person
who is responsible for their safety and who has been informed of the haz-
ards of the unit.
In order to prevent accidents or damage, the manufacturer recommends
n
that technicians attend training and safety instructions.
Safety instructions
High voltages when connecting to the mains power
Danger to life due to high voltage.
Disconnect from the power supply.
n
Make sure the unit is disconnected from the power.
n
14 / 156
Description
Cable harness W33
Cable harness W58
PCB holder 2 options
Plastic clip spacer 4.8 mm
Through clamp 1.5 mm² grey triple
Flange for triple clamp
Marking 1-3-5-8
Marking 2-4-7-10
Marking 6-9
IO module extension, 4-way relay
Cable gland M20
Cable gland Multi M20
NOTICE
DANGER