Rational iVario L Instrucciones De Modificación página 20

1 | MI_2322: Retrofit 4-way relay PCB L, XL
1. Remove the rear mounting plate for the cable gland on the rear of the unit.
2. Punch out the marked perforation with a suitable tool. If it is already in use,
use a different perforation.
3. Attach the cable gland with seal and plug to the broken out position. If
cable glands are already installed, replace one of them with the Multi M20
cable gland.
4. Screw the mounting plate on.
>>
The cable gland is mounted.
Work steps – Installing the 4-way relay PCB
a
The holder and 5 PCB holder clips are ready.
a
The 4-way relay PCB is ready.
1. Open the electrical compartment, as described in the original installation
manual for the units iVario Pro L / XL in section "6.2 Opening the elec-
trical compartment".
20 / 160