Kohler K-T15806 Guia De Instalacion página 5

Spout
Supply Tube
Spout
Sleeve
Assembly
3. Install the Spout
IMPORTANT! Keep the spout supply tube clean above the finished
deck to avoid damage to the O-ring seal.
Apply a ring of plumbers putty or other sealant around the
underside of the spout base according to the manufacturer's
instructions.
Position the spout on the sleeve, and carefully press down until
the spout contacts the finished deck.
Align the spout as desired, and tighten the setscrew.
Insert the plug button (if included) over the setscrew, flush with
the spout surface.
Kohler Co.
Setscrew
O-Ring
Plug
Button
O-Ring
5 1007778-2-C