Xylem Flojet 4105 Serie Manual De Instrucciones página 2

FEATURES
• Self-Priming
• Dry Running
• Soft, Noise Absorbing Mounts
• Corrosion Resistant Materials
• Models Meet U.S.C.G. Electric Standards
• 3.3 GPM (12.5 LPM) Model for 15-30 gal. (57-113
Liter) tanks
• 5 GPM (18.9 LPM) Model for 30-50 gal. (113-189 Liter) tanks
• Thermal Overload Protection
SPECIFICATIONS
Motor:
Permanent Magnet, Ball Bearing, O-Ring
sealed. CE Models are fully suppressed.
Four chamber positive displacement
Pump:
diaphragm design; Self-priming up to 6
ft. (2m) suction lift; Pump able to run dry
without, damage; Removable port to hose
connectors.
MODEL*
X4105501
X4105503
X4125502
X4125504
*CE fully suppressed models are identified by a prefix "R" and a CE mark on the label. (i.e. R4105501), and non CE models are identified by a prefix "0". Self
Declaration Of Conformance (SDOC) is available upon request.
EXPLOSION HAZARD: Do not use motor pump units for pumping gasoline or other
flammable liquids. Doing so may result in explosion which could cause personal injury,
OPERATION
Your "Quad II" bait tank pump is designed to self
prime up to 6 feet suction lift and fill your tank in 8-12
minutes. This allows 5 to 6 water changes per hour. If
pump fills tank in less than 8 minutes, divert excess
water by installing a T or Y valve. Reduce turbulence by
adding additional inlet at waterline or drill out multiple
standpipe holes so water does not spurt out of holes.
Your lively bait need calm, fresh water.
This pump is quiet running. It is recommended you
utilize a "lighted" on-off switch so that the pump is
turned off when not in use. The "Quad II" is able to run
VOLTS AMP DRAW @ 10 PSI (0.7 BAR)
12V DC
24V DC
12V DC
24V DC
death or property damage.
PUMP
SERIES
X4105XXX
X4125XXX
3.6
1.8
3.6
1.8
dry (no liquid) for extended periods with no damage to
the pump. However, this could cause needless battery
drain.
For general purpose or diesel transfer, plug in your
choice of ports and lock in with slide clips. Attach hoses
and wiring.
For portable use we recommend the pump be attached
to a base (i.e. 3/4" x 8" x 10" board or plywood), add a
toggle switch, a length of two conductor cables with
alligator clips for battery connection.
2
DIMENSIONS - INCHES (MM)
HEIGHT WIDTH
3.75 (95) 6.3 (160)
3.75 (95) 6.3 (160)
FLOW GPM (LPM) STRAINERS INCLUDED
3.3 (12.5)
3.3 (12.5)
5 (18.9)
5 (18.9)
WEIGHT
LB. (KG)
LENGTH
8.2 (208) 3.9 (1.8)
9.9 (252) 6 (2.8)
Yes
Yes
Yes
Yes