Braun Aesculap Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 13

Coupling and uncoupling of attachments of
small drill
►
Secure small drill 6 against inadvertent activation
by engaging safety catch 9.
Note
For further information on the small drill attachments,
see TA011936 (Acculan 3Ti)
(Acculan 4).
To apply drilling wires we recommend using the special
Kirschner wire chuck. This quick-action chuck adapter
allows quick and easy tensioning of drilling wires.
To protect against injuries when using long drilling
wires, screw in the Kirschner wire protection sleeve
supplied with the product.
►
Screw Kirschner wire protection sleeve 15 into
adapter 17, see Fig. 8.
Fig. 8
and/or TA014540
17 15
Coupling
►
Push the attachment onto the small drill 6 , until it
you hear it engage, see Fig. 9.
Fig. 9
Uncoupling
►
Turn rotating sleeve 5 in the direction of the arrow
(clockwise when viewed from the rear end of small
drill 6), see Fig. 10.
Fig. 10
►
Remove the attachment from small drill 6.
6
5
6
en
11