ivoclar Stratos 300 Instrucciones De Uso página 10

4. Installation and
Initial Start-up
4.1 Unpacking and checking the
contents
Remove the components of the Stratos 300 from
their packaging and check the delivery for
completeness.
Stratos 300 basic model:
1 x Stratos 300
1x Incisal plate 0°
1x Incisal indicator
2x Retentive base blocks
1x Plaster protection plate
1x Incline support holder
If certain parts are missing or damaged, contact your
local Ivoclar Vivadent Customer Service. We
recommend keeping the original packaging for
possible future transportation purposes.
4.2 Assembly and initial set-up
Incline support holder
The incline support holder enables ergonomic
handling of the articulator. If mounted, it maintains
the articulator at approx. a 45° angle. This position
permits a superb overview of the model mounted in
the articulator.
7. 1
Insert the incline support holder (7.2) into the holding
device (7.1) for the incline support holder. If
necessary, the incline support holder can be removed
from the apparatus.
Secure the base block (33) to the articulator by
means of the GI knurled screw (2.1).
10
5. Handling and
Operation
5.1 Centric position
The Stratos 300 features a precise centric locking
system that can be activated in the following
positions:
5.1.1 Centric fixation (4.1) open
This position permits the simulation of jaw movements.
If the rubber bands (4.2) are removed, the two frames
can be separated.
7.2
4. 1
4.2