Hilti PM 20-CG Manual De Instrucciones Original página 32

3 Description
3.1 Product overview
3.2 Intended use
The product is a self-leveling plumb-and-line combilaser that enables a single person to plumb, transfer right
angles, level horizontally and carry out alignment work quickly and accurately.
The product projects two lines (horizontal and vertical) and five points (above, below, right, left and line
intersection). The lines and line intersection point have a range of approx. 20 m. All other points have a range
of approx. 30 m. Range depends on the brightness of ambient light.
The product is intended mainly for indoor use. For use in outdoor applications, make sure that the boundary
conditions are similar to those encountered indoors.
Possible applications are:
• Marking the position of partition walls (at right angles and in the vertical plane).
• Checking and transferring right angles.
• Aligning components to be installed or sections of a structure in three axes.
• Transferring points marked on the floor to the ceiling.
PM 20­CG A12
▶ Use only Hilti Li­ion batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C4/12 series for charging these batteries.
3.3 Items supplied
PM 20­CG
Combilaser, PMA 89 magnetic holder, pouch, 4x 1.5V AA battery, manufacturer's certificate, safety data
sheet, operating instructions
28 English
1
Li-ion battery (only PM 20­CG A12)
@
Charge state indicator
;
Receiver mode button
=
Line mode button
%
Laser exit window
&
Selector switch for ON / OFF and lock / un-
(
lock pendulum
Mounting thread
)
Eye for attaching the PMA 92 retaining strap
+
Position of rating plate
§
Battery compartment (only PM 20­CG and
/
PM 20­CGE)
PMW 71 magnetic foot (only PM 20­CGE)
:
Magnets for mounting
∙
PMA 89 magnetic holder (only PM 20­CG
$
and PM 20­CG A12)
Thread for mounting the laser
£
Feet (foldable)
|
2328447
*2328447*