4. INSTALLATION
The refrigerator must be placed on a completely flat surface,
leave between 5 and 10 cm between each side of the
appliance and the wall, and leave 30 cm between the top of the
appliance and the ceiling. An incorrect location could increase
the noise of the device.
Choose a place that is not exposed to sunlight, high
temperature or humidity, since moisture can cause stains.
REMOVE the lower panel bef ore installation.
The appliance can be adjusted by rolling its two legs in when
it is unstable. Rolling clockwise
REFRIGERATOR DOORS
The side to which the refrigerator door opens can be altered on the
right side to the left, if the place of installation so requires.
WARNING: In case of changing the door, make sure that the
appliance is completely turned off and disconnected from the power
supply.
Remove all the bottle racks from the door to p revent them
from being damaged.
53