Publicidad
Idiomas disponibles
Idiomas disponibles
Jack Screw
(x2)
Figure 4. Installing the Vehicular Power Adaptor Holder onto the
When installing the PMLN6432 & PMLN6433 Vehicular Charging
Cradle with Vehicular Power Adaptor Kit, use the following
procedure. See Figure 4:
1.
Place the NNTN8040 Vehicular Power Adaptor on the holder
adaptor as show in Figure 4.
2.
Push the Adaptor Holder Top to engage onto the Adaptor Holder
bottom.
3.
Secure the Adaptor Holder onto the bottom of the cradle pocket
by screwing the jack screws into the insert nuts.
Figure 3. Clipping the RSM on the bracket.
Insert Nut
8
Vehicular Power Adaptor
Holder PMLN6075
(x2)
Vehicular Power Adaptor
cradle.
(NTNN8040)
Publicidad
