Publicidad
Idiomas disponibles
Idiomas disponibles
Display of normal running
On the occurrence of a failure, the corresponding icons will give a combined
blink, the error codes and types are shown as follows:
Error Code Error Description
Temperature sensor of refrigerator room fail
E1
Defrosting sensor of refrigerator room fail
E5
Communication error
E6
E7
Ambient temperature sensor fail
If no failure, the screen displays the setting temperature of the refrigerator
room.
Standby function
Longpress the standby button
Temperature setting
The temperature setting will be changed once you press the SETTING button.
Then, the refrigerator will run according to the new temperature setting after 15s.
Setting 1
Setting 2
InstantCool Mode
Enter: under refrigerator mode,press the button (
During InstantCool mode, the refrigerator runs according to the temperatures set
at 2ºC, and it will exit this mode automatically after running for 360 minutes
or temperature setting or mode setting.
for 10 seconds to set the standby function:
Setting 3
Setting 4
17
Display
" & Icon" " shine at same time
Icon "
Icon "
" & Icon" " shine at same time
Icon " " & Icon " " shine at same time
Icon "
" & Icon" " shine at same time
Setting 5
) until the icon
Setting 6
lights up.
V.1
Publicidad
