HAMPTON BAY 56058 Guía De Uso Y Mantenimiento página 13

Assembly - Attaching the Lights (continued)
2
Installing the bulbs and glass shade
WARNING: Allow the glass shade to cool completely before
removing.
CAUTION: Make sure the power is off before attaching or
removing the glass shade.
□
Remove the compressing ring (WW) from the threaded
socket of the light kit by turning the compressing ring
counterclockwise until it unlocks.
□
Insert the glass shade (I) into the light kit cowling and turn
the compressing ring (WW) clockwise to tighten and secure
the glass shade. Repeat for the remaining shades.
□
With power off, screw the LED bulbs (J)(9.5W, maximum) into
the sockets.
Assembly - Attaching the Accessories
Mounting the remote control holder
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle to the wall.
□
Slide the screw cover plate up to remove it from the wall
cradle.
□
Position the wall cradle in the desired position and attach it to
the wall using the included wall cradle screws.
□
Slide the screw cover plate back onto the wall cradle to
conceal the screws.
Screw cover plate
13
Please contact 1-877-592-5233 for further assistance.
E
F
I
WW
J
HOMEDEPOT.COM/HUBSPACE