Toro TimeCutter Max Manual Del Operador página 43

Air Cleaner Service (continued)
3. Clean around the air-cleaner cover
prevent dirt from getting into the engine and
causing damage.
4. Loosen the fasteners
cover.
5. Remove the air-cleaner elements
6. Separate the foam and paper elements.
Servicing the Foam Element
1. Wash the foam element in liquid soap and warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Replace the foam element if it is torn of worn.
3. Lightly oil the foam element using new engine oil and squeeze out any excess oil.
Servicing the Paper Air-Cleaner Element
1. Clean the paper element by tapping it gently to remove dust.
Note:
2. Inspect the element for tears, an oily film, or damage to the rubber seal.
3. Replace the paper element if it is damaged.
Do not clean the paper filter.
3465-589A
and remove the
If it is very dirty, replace the paper element with a new one.
to
.
G399637s
G451151
IMPORTANT
IMPORTANT
Page 5–6 Maintenance: Engine Maintenance