Bosch GEX Professional 125-150 AVE Manual Original página 23

OBJ_BUCH-1330-001.book Page 22 Wednesday, February 23, 2011 9:55 AM
22 | English
Material
– Automotive paint
– Masonry, stone
– Marble
– Granite
– Ceramic
– Glass
– Plexiglas
– Glass-fibre
plastics
Replacing the Sanding Sheet
(see figure A)
To remove the sanding sheet 10, lift it from the
side and pull it off of the sanding plate 8.
When attaching a new sanding sheet, remove
any dust or debris from the sanding plate 8, e.g.,
with a brush.
The surface of the sanding plate 8 is fitted with
Velcro backing for quick and easy fastening of
sanding sheets with Velcro adhesion.
Press the sanding sheet 10 firmly against the
bottom side of the sanding plate 8.
To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet
match with the holes in the sanding plate.
Selection of the Sanding Plate
Depending on the application, the machine can
be equipped with sanding plates of different
hardness:
– Sanding plate, extra soft: Suitable for polish-
ing and sensitive sanding, incl. on convex sur-
faces.
– Soft sanding plate: Suitable for all sanding
applications and general-purpose use.
– Hard sanding plate: Suitable for high sanding
capacity on flat surfaces.
2 609 932 777 | (23.2.11)
Application
For pre-sanding
For shaping and braking edges
For final sanding and forming
For polish-sanding and rounding off edges
Replacing the Sanding Plate
(see figure B)
Note: Replace a damaged sanding plate 8 imme-
diately.
Pull off the sanding sheet or polishing tool.
Completely unscrew the screw 11 and take off
the sanding plate 8. Attach the new sanding
plate 8 and tighten the screw again.
Note: When attaching the sanding plate, pay at-
tention that the toothing of the drive element
engage into the openings of the sanding plate.
Note: A damaged sanding-plate base may be
changed only by an authorised after-sales serv-
ice agent for Bosch power tools.
Dust/Chip Extraction
Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
Grain size
coarse 80
medium 100
120
fine 180
240
320
400
very fine 600
1200
Bosch Power Tools